CBJWC - HI-TECH YELLOW WAX (LIQUID), 765-2912, M26
- MSDS: CBJWC
- Manufacturer: MEGUIARS INC
- Product Name: HI-TECH YELLOW WAX (LIQUID), 765-2912, M26
- National Stock Number: 7930-00N069029
Product Identification
Product ID:HI-TECH YELLOW WAX (LIQUID), 765-2912, M26
MSDS Date:02/03/1993
FSC:7930
NIIN:00N069029
MSDS Number: CBJWC
Responsible Party
IRVINE, CA 92714
US
Emergency Phone: 800-854-8073
Info Phone: 714-752-8000
Cage: GO009
Contractor
Telephone: 714-752-8000
Cage: 14088
Ingredients
PETROLEUM DISTILLATE; (LIGHT DISTILLATE)
CAS: 64742-14-9
Fraction By Weight: 18-25%
OSHA PEL N/K
ACGIH TLV: N/K
NAPHTHA, HEAVY ALKYLATE; (HEAVY ALKYLATE NAPHTHA)
CAS: 64741-65-7
Fraction By Weight: 10-15%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
KAOLIN; (NON-METALLIC KAOLIN)
CAS: 66402-68-4
Fraction By Weight: 5-10%
OSHA PEL 10 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: NONE NORMALLY.
SKIN/INGESTION/EYES: MAY CAUSE IRRITATION. PROLONGED OR INTENTIONAL
EXPOSURE TO HIGH CONCENTRATIONS MAY CAUSE IRRITATION TO SKIN,
DIGESTIVE AND BREATHING TRACTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING DERMATITIS CONDITION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH WITH SOAP AND
WATER. INGESTION: DO NOT INDUCE VOMITING. CONSULT WITH MD BEFORE
ATTEMPTING FIRST-AID PROCEDURES. EYES: FLUSH WITH CLEAR WATER FOR
AT LEAST 15 MINUTES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:USE DRY CHEMICAL, WATER, FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:CONTAIN AND PICK UP WITH AN ABSORBENT. CAN BE
PUT INTO A METAL, PLASTIC, OR GLASS CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AWAY FROM ACIDS AND OXIDIZERS.
KEEP AWAY FROM EXTREME HEAT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>370F,>188C
Vapor Pres:<10
Vapor Density:>1
Spec Gravity:0.98 (H*2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NONE
Appearance and Odor:THICK YELLOW LIQUID, WITH SWEET ODOR
Percent Volatiles by Volume:<10
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS AND OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
SILICONE OXIDES.
Disposal
Waste Disposal Methods:SANITARY LANDFILLS FOR ABSORBENT MATERIALS, OR
AS REQUIRED BY LOCAL REGULATIONS. DISPOSE OF IN ACCORDANCE W/LOCAL,
STATE & FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.